Contact Us

Dual Purpose Workstation for BORDERS & GUSSETS, Over/Under Design

Home > Mattress > Border > Serge > 1962
Dual Purpose Workstation for BORDERS & GUSSETS, Over/Under Design - 1962
Images may include options.
1962 Brochure

Best viewed using Firefox or Chrome

Dual Purpose Workstation for BORDERS & GUSSETS, Over/Under Design - Model 1962 - Xtras ---

Model 1962

Dual Purpose Workstation for BORDERS & GUSSETS, Over/Under Design

  • Dual electronic servo drive motors with needle positioning
  • Uses two conventional overlock sewing heads
  • Interchangeable sewing heads, need only one set of replacement parts
  • Load and unload from front position
  • Material capacity: 0" - 36" according to machine class
  • Turn off sewing head for single serging
  • Needle positioning (no synchronizer required)
  • Electronic thread break detection
  • Variable tensioning of border material
  • Servo drive variable speed puller with long-lasting urethane rollers
  • Stops automatically for material splice
  • Foot pedal activation for splicing and servicing
  • Border may be serged without edge trim
    Technical Information:
Max sewing speed (rpm)6000
Factory preset speed (rpm)5000
Max stitch length (spi)4
Needle systemSNB27140
Needle size22/140
Weight of materialMEDIUM
Voltage (v/ph/hz)220V 1PH 60HZ
Current (amps)10
Motor typeEFKA DC
Air pressure (psi)80
Air consumption (cfm)24
Shipping weight (lbs)12001800
Shipping dimensions (w/l/h, inch)62 x 96 x 5762 x 96 x 75
1962 Functions
1962 Footprint
1961-650 - Yardage counter
1961-650A - Preset yardage counter
1961112 - Flange front assembly
1961-KIT10 Border joining chainstitch
The operator loads the border through the front tension assembly and uses the foot pedal to sew it through the sergers. Activating the puller lift switch opens the puller, the cloth is inserted between the rollers and the switch closes the puller.

The operator places the cloth between the spindle rods on the winder and presses the start button. The unit automatically serges all the material on the roll or in the bin and automatically stops when the end of the material is sensed. The unit stops with the trailing edge of the material held by the front tension assembly so that the leading edge of the next band can be easily spliced. The finished width of the goods being sewn can be adjusted by turning a crank and moving the left serger. A scale is provided which indicates the finished width of the goods being sewn.
125 Feet Per Min. at 4SPI
Notice: Contents subject to change...[more]Change Notice:

All content contained herein is subject to change without notice. Atlanta Attachment Company reserves the right to make changes, modifications, additions, corrections or deletions. Atlanta Attachment Company may terminate, change, suspend or discontinue any product in this catalog, including the availability of any products, at any time. Every effort is made to keep products up-to-date but due to the nature of printed media, changes may only be available online or by contacting your sales representative.

All materials contained herein are additionally protected by United States copyright law and may not be used, disclosed, reproduced, distributed, published or sold without the express written consent of Atlanta Attachment, which consent may be withheld in Atlanta Attachment's sole discretion. You may not alter or remove any copyright, trademark or other notice from copies of these materials.

Atlanta Attachment Company, AAC, Atlanta Parts Depot, "Sudden Service", Sewing Automation, individually and when used in combination are registered trademarks of Atlanta Attachment Company.

© 2016 Atlanta Attachment Company. All rights reserved.
  • 362 Industrial Park Drive, Lawrenceville, GA 30046 USA
  • 770 963-7369 - FAX 770 963-7641
  • © 2016 Atlanta Attachment Company   |   Last updated July 2018